H:
W:
D:
Q:
PLAstic

Plain old PLA except it is made from 100% recycled materials or bio plastics (based on the colour chosen) A thermoplastic that is melted and deposited in layers, to create your 3D printed products.

Minimum Wall Thickness 2 mm
Minimum Details 0.5 mm
Accuracy
0.2%
Maximum Size 400mm x 400mm x 400mm
Interlocking or Enclosed Parts? No
Typical use Ideal for visual models and prototypes with low details and limited functionality. A little brittle so not ideal for moving parts.
00.00 AED
HighDetail

An opaque photo-polymeric liquid that comes in White, Grey and Black. Reducing the layer size to below 35 m allows the finished print to show an extremely high level of detail.

Minimum Wall Thickness 1 mm
Minimum Details 0.2 to 0.3 mm
Accuracy
0.1%
Maximum Size 400mm x 400mm x 400mm
Interlocking or Enclosed Parts? Yes
Typical use High-detail resin is ideal for small models that require fine details.
00.00 AED
FullColour

The only material that lets you print models with more than one colour. These models are made from fusing fine white, sandstone powder. Whilst the model is being printed, a separate print head applies colour.

Minimum Wall Thickness 2 mm
Minimum Details 0.2 to 0.3mm
Accuracy
0.2%
Maximum Size 490mm x 390mm x 200mm
Interlocking or Enclosed Parts? Yes
Typical use Multicolor is best when used for non-functional models such as figurines or architectural models.
00.00 AED
Transparent

A semi-transparent liquid resin that is hardened by a laser! It's strong, hard, and stiff. Looks Like matte finish frosted glass by default. Can be post processed to make it full clear or glossy frosted

Minimum Wall Thickness 3 mm
Minimum Details 0.5 mm
Accuracy
0.2%
Maximum Size 400mm x 400mm x 400mm
Interlocking or Enclosed Parts? No
Typical use Ideal for transparent visual models and prototypes with limited functionality.
00.00 AED
Castable

Castable photo-polymeric liquid. It burns clean, without any residue. Primarily used for investment casting in metal. Curious? Check out our guide on how investment cast jewllery with Sklptor.com by Clicking here

Minimum Wall Thickness 1 mm
Minimum Details 0.2 to 0.3mm
Accuracy
0.2%
Maximum Size 400mm x 400mm x 400mm
Interlocking or Enclosed Parts? No
Typical use Castable material is designed for complex models that will be manufactured using investment casting. The resulting model can be cast in almost any metal from gold to steel.
00.00 AED
RubberLike

Polyurethane plastic with many properties, including elasticity, transparency,resistance to oil ,grease and abration

Minimum Wall Thickness 2mm
Minimum Details 0.5mm
Accuracy
0.2%
Maximum Size 400mm x 400mm x 400mm
Interlocking or Enclosed Parts? No
Typical use This material is ideal for models that require a deal of flexibility but wont endure much stress.
EG: Custom wheels for a model car.
00.00 AED

Colour and finish

×